CN-KT industrial Automatic self-cleaning sediment water filter

1.Norminal flow per unit:45 to 2350m3.h 2.galvanized and stainless filter housing,filter net strainer 3.automatic,self-cleanin

CN-KT industrial Automatic self-cleaning sediment waste water filter:

Single treatment of water: 45~2350m³/h

Maximum operating pressure: 0.1~1.6Mpa

Pressure loss during cleaning:≤0.018Mpa

Maximum working water temperature: 95°C

Filter micron accuracy range: 100~3000 μm

Water volume self-cleaning needed::≤1%

Self-cleaning time:10~60s

Self-cleaning control mode: pressure gage control

Time control ,manual operation

Electric control mode: AC three-phase 380V/50HZ

Control interface: digital display, knob, switch

Filter type: 316L woven grid, Wedge-shaped network

Automatic self-cleaning filter is kind of precision equipment that directly use trap valve to intercept impurities in the water to purify the water and other equipment, thus to protect the normal work of the precision equipment. Owing to the intelligent design (PLC, PAC), when the water enter the filter from the water inlet into the self-cleaning filter body, the system can identify the degree of impurities sedimentation and automatically send signal to the wash water valve blowdown automatically. Automatic self-cleaning filter overcomes traditional filtering products’ weakness: hidebound pollution load, vulnerable to plug ,the filter element need to take apart and washing, the state of filter can not be monitored .But automatic self-cleaning filter can filter the raw water and self-cleaning , cleaning the sewage system at the uninterrupted water supply, monitor the work of state and fully automatic. After research the filter accuracy and flow, we develop JT, ZT, FT, ST, UT, XT, UTS, DT, HT nine series models. Accuracy covering from 10 um to the various filters 3000 um, to provide all kinds of water filtration equipment.    

    Characteristics about the automatic self-cleaning filter

           1.simple structure.

           2.short Anti-cleaning time, small loss in pressure and flow by PLC and PAC, high degree of automation

           3.equipment can be connected with the central control system

            4.high-precision filter

            5.filter traps does not need replacement

            6.long useful life applicable to different water quality.

            7.few wearing parts, without supplies, low operating cost, simple operation management

            8.continuous flow during automatic anti-washing

            9.filtering accuracy conversion

      

It is widely used in drinking water treatment, the cycle of construction water treatment, the cycle of industrial water treatment, sewage treatment, and the cycle of mining water treatment, golf course water treatment and other fields

CN-KT industrial Automatic self-cleaning sediment water filter